ENGLISH foundation molds

.
Silicone
foundation molds for small cell beekeeping

with a new cell geometry that is better accepted by the bees

Silicone matrices with the new cell geometry to build foundation molds -> read more

Water-cooled silicone foundation mold that we now offer for sale
.
Available at the shop.
.
At the moment only available in Langstroth size (420 mm x 200 mm) and cell sizes 4.9 mm and 5.1 mm and in Dadant 4,9.
.
  • new water cooled foundation mold
  • Self-separating silicone - no separating agent necessary
  • Water cooling by copper plate
  • thickness adjustment of foundation
  • opening by lever mechanism
  • optional with silicone apron for the wax

.
Video of the mold in action
A great advantage is the use of a self-separating silicone. So the use of a release agent is no longer necessary. The stamped wax foundations are very easily separated from the silicone and do not require the use of a spatula or compressed air to peel off. In the second part of the video you can see how easy everything works now:
.
.
  • .
    http://resistantbees.com/fotos/blog/guss_6.jpg
    .
  • Wisa Wire plywood is practically indestructible and is designed for use as flooring in the transport industry i.e. in trailers, horse boxes and railway wagons and building applications such as warehouses, loading platforms and scaffolding:
    .
    http://resistantbees.com/fotos/blog/guss_1.jpg.
  • Water cooling both at the top as well as at the bottom of the mold is guaranteed by a copper plate with a welded copper tubing coil. Since copper is a very good conductor of heat, cooling is optimal. The copper plate is screwed onto the Wisa Wire plate:
    .
    http://resistantbees.com/fotos/blog/guss_4.jpgCooling is also possible with a closed system consisting of a 200 liter water drum and a small electric pump. This saves a lot of water!
    .
  • Thickness adjustment is possible thanks to 4 adjustment screws and oblong holes in the hinge.
    To adjust:
    Open the hinge screws slightly and loosen the adjustment screws. Set the top at the bottom without distance and then unscrew the adjusting screws until they touch the aluminum rail. The desired thickness of the wax foundation sheet can be set by loosening the 4 screws the same amount. One lap is 0.8 mm thickness. Tighten the screws of the hinge and finished:

    .
    http://resistantbees.com/fotos/blog/guss_3.jpg.
  • The mold is opened by a lever mechanism:
    .

    http://resistantbees.com/fotos/blog/guss_5.jpg.
  • A great advantage is that the silicone base is molded in one piece. This means that the silicone edges are not glued to the matrice, but they and the matrice are one piece. Therefore the wax does not touch metal parts and can not get into cracks, where it could adhere tightly:
    .
    Bild
    .
  • optional with a silicone apron to collect the wax:
    .
    http://resistantbees.com/fotos/blog/guss_8.jpg.
    http://resistantbees.com/fotos/blog/guss_9.jpg
Available at the shop.
At the moment only available in Langstroth size (420mm x 200mm) and in cell sizes of 4.9mm and 5.1mm.
.
.

The new cell geometry

Dee Lusby writes in her webpage that one should use

foundation without pronounced cell walls.

Well I made tests and to my surprise came out the following:

I added to several hives complete supers with 11 frames. Alternating foundations with the new cell geometry and foundation after the swedish model, which has cell imprints similar to what is used anywhere. A swedish, a new one, a swedish, a new one ……. all the box like this. It was used the same wax and the same cell dimensiones between 4,8 and 4,85mm.
All this with a good nectar flow.
Next day all the hives had built combs in the frames with foundation of the new geometry and the swedish ones were not built.

Bild

Bild

So the decision matured to build foundation molds with this new cell geometry since the foundation on the market almost ] all have large errors en cell measurement.

 

2 Antworten auf ENGLISH foundation molds

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert